Since the Instacal driver installer is a compressed file, you will be prompted to run the built-in WinZip Self-Extractor. Figure 6: Click ‘OK’ to run the built-in WinZip Self-Extractor On Windows versions XP and newer, you will be prompted with an “Open File – Security Warning” dialog as shown in Figure 5. Figure 5: The ‘Open File – Security Warning’ dialog Click on the Install button as shown in Figure 4 to start the Instacal installer. Alternately, if you do not have the BSI Software Installation CD you can download the Instacal software from the BSI support website.įigure 3: After inserting the BSI Software Installation CD, the application installer should automatically start Figure 4: Click ‘install’ to start installation of the Instacal driverĬhoose ‘Measurement Computing – Instacal Drivers’ from the Application dropdown. In this case, you can use Windows Explorer to run the Install.exe program contained on the BSI Software & Driver installation CD-ROM. If you do not see a window appear that is similar to the one in Figure 3, you may have disabled the “autorun†feature of your CD-ROM. Insert the BSI Software Installation CD into your computer’s CD-ROM drive and the installation application should start automatically. The installation process only takes a couple of minutes. Installing the Instacal SoftwareThe Instacal Software facilitates the communication between applications and the USB 1024ls. The first time the USB 1024ls is plugged into a USB port Windows will automatically identify and install the USB-1024LS as a “USB Human Interface Device†and display the notice shown in Figure 2. Figure 2: “Found New Hardware” message indicates the USB 1024ls has been detected. IMPORTANT NOTE: It is not normally possible to use USB cables over distances greater than 5 metres. If you need a longer cable you can order a replacement from your local computer store – the cable is known as an “A to B USB cableâ€. The cable will only plug in one way as the two ends are different as shown here. Connecting to your ComputerTake the USB cable and plug one end into the USB-1024LS and the other end into a spare USB port on your computer (i.e.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |